Shenzhen ZYX Science & Technology Co., Ltd.
Focusing on the subtle details of PC accessories, ZYX company achieves a significant difference in computer performance. ZYX company focuses on the field of computer accessories, with every product
Add to Cart
PoE HAT for Raspberry Pi 5 With Cooling Fan/Computer Module 5, WithAutomatic Discoloration LED, Power Over Ethernet HAT for Pi 5/CM5, 5V 5A 25W, IEEE 802.3af/at-Compliant Network Standard, Pi 5 PoE HAT Compatible with Raspberry Pi 5 Official Case.
Product description:
1.PoE HAT for Raspberry Pi 5 --- Power Over Ethernet HAT (G) for Raspberry Pi 5, easy to assemble into the official case. 5V 5A 25W Output, stable performance.
2.Power via a single Ethernet cable --- By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for the Raspberry Pi 5 in only one Ethernet cable.
3.LED switch can control the LED Power ON/OFF, it will not bring the dazzing feeling when you use it in the night.
4.PoE capabilit y--- IEEE 802.3af/at-compliant. PoE power input: 38V ~ 57V DC in.
5.Compatible With Raspberry Pi 5 Official Case --- Compact size Design, can be directly installed into the Raspberry Pi 5 Case.
6.Onboard original IC solution for more stable PoE power performance. Adopts non-isolated switched-mode power supply (SMPS).
7.Application Example ---With this product, you can use an Ethernet cable with PoE function to power the Raspberry Pi directly. 5A under sufficient heat dissipation condition Bluetooth signals.
Raspberry Pi 5 motherboard POE HAT product introduction.
With the continuous expansion of Raspberry Pi 5 motherboard applications, this POE HAT (Power over Ethernet Hardware Attached on Top) is like a tailor-made super assistant, dedicated to bringing users unprecedented convenience and stable performance.
1, Core function: POE power supply and network transmission integration.
1. POE power supply: When installing this POE HAT on a Raspberry Pi 5 motherboard, the biggest highlight is the ability to provide power through an Ethernet cable. The traditional power supply method for Raspberry Pi requires an additional power adapter to be connected, which not only increases the complexity of wiring, but may also cause problems such as power incompatibility. POE power supply technology follows the IEEE 802.3af/at standard and can provide stable DC power to the Raspberry Pi 5 motherboard through idle or data transmission lines in Ethernet cables. The voltage range is usually between 44V and 57V, and can provide up to 30W of power, fully meeting the power needs of the Raspberry Pi 5 motherboard and its external devices. This means that in application scenarios such as smart home control nodes and industrial IoT terminals, there is no need to separately lay power cords for each Raspberry Pi device, greatly simplifying wiring work and reducing installation costs and maintenance difficulties.
2. Network transmission: At the same time, this POE HAT does not affect the network transmission function of Ethernet. It adopts advanced network signal processing technology, supports adaptive network rates of 10/100/1000Mbps, and can stably transmit data. Whether it is remote data collection, real-time video monitoring, or running network-based applications, it can ensure fast and accurate data transmission. In the smart home system, Raspberry Pi 5 is connected to the home network through POE HAT, which can quickly receive and send control instructions, achieving real-time control of various smart devices; In the industrial Internet of Things environment, the Raspberry Pi 5 serves as a data acquisition terminal and, with the network transmission capability of POE HAT, can timely upload a large amount of sensor data collected to cloud servers for analysis and processing.
2, Heat dissipation guarantee: Built in cooling fan protects performance.
1. Efficient heat dissipation design: The heat dissipation fan equipped on the POE HAT motherboard is an important component to ensure the stable operation of the Raspberry Pi 5 motherboard. During the operation of the Raspberry Pi 5 motherboard, especially when handling complex tasks or running under high loads for a long time, the CPU and other electronic components generate a large amount of heat. If the heat is not dissipated in a timely manner, it can cause the motherboard to overheat, leading to a decrease in system performance, stability, and even hardware damage. This cooling fan adopts a high-efficiency and low-noise design, and the speed can be automatically adjusted according to the motherboard temperature. When the motherboard temperature is low, the fan runs at a lower speed to reduce noise; As the temperature rises, the fan speed automatically increases, increasing the heat dissipation. The fan, with its specially designed air duct, can accurately direct cold air towards the CPU and critical electronic components, quickly removing heat and ensuring that the motherboard temperature remains within a reasonable range.
2. Material and reliability: The blades of the cooling fan are made of lightweight and high-strength engineering plastic material, which has good dynamic balance performance and can maintain stability even when rotating at high speeds, reducing vibration and noise. The motor of the fan adopts high-quality ball bearings, which have a long operating life and high reliability. The fan is connected to the POE HAT motherboard through a stable snap fastener, ensuring that it will not loosen in various environments. At the same time, the power and control wires of the fan have undergone special shielding treatment, effectively preventing electromagnetic interference and ensuring the normal operation of other circuits on the motherboard.
3. Installation convenience: easily achieve functional expansion.
1. Plug and play installation method: Installing this POE HAT onto the Raspberry Pi 5 motherboard is extremely easy. Users only need to accurately align the POE HAT interface with the corresponding interface of the Raspberry Pi 5 motherboard, and gently press to complete the physical connection. POE HAT has fully considered compatibility with Raspberry Pi 5 motherboards in its design, with completely matched interface definitions and no need for additional adapter devices. After installation, the system will automatically recognize POE HAT and configure it accordingly, without the need for user manual intervention. The entire installation process does not require professional tools, and even users who are new to Raspberry Pi can easily complete it, greatly reducing the threshold for use and allowing users to quickly enjoy the convenience brought by POE power supply and heat dissipation enhancement.
2. Does not affect other extensions: It is worth mentioning that after installing POE HAT, other extension interfaces on the Raspberry Pi 5 motherboard can still be used normally. Whether it is connecting the camera module for image acquisition or connecting various sensors for environmental monitoring, it is not affected. This allows users to use POE HAT to optimize network power supply and cooling, while also flexibly expanding the functionality of Raspberry Pi 5 according to actual needs, creating personalized application systems.
Applicable scenarios:
1. In the field of smart home systems, Raspberry Pi 5 is often used as an intelligent control center. By installing POE HAT, it can be easily deployed in various corners of the room, with only one Ethernet cable needed for network connection and power supply. For example, by installing it in the living room and connecting it to smart lighting, smart curtains, smart appliances, and other devices in the home through the network, users can remotely control these devices through a mobile app to achieve a more convenient and intelligent home experience. At the same time, the cooling fan ensures stable performance of the Raspberry Pi 5 when running various smart home control programs for a long time, without lagging or malfunctioning due to overheating.
2. Industrial IoT scenario: In the industrial environment, Raspberry pie 5, as a edge computing device, undertakes an important task of data acquisition and pre-processing. The POE power supply function of POE HAT enables the Raspberry Pi 5 to be easily deployed in industrial sites without traditional power sockets, such as factory workshops, warehouses, etc. Connected to the industrial network through Ethernet cables, it can collect various sensor data in real-time, such as temperature, humidity, pressure, etc., and perform preliminary analysis and processing before uploading it to the cloud. The cooling fan ensures that the Raspberry Pi 5 can still operate stably in complex industrial environments, facing unfavorable factors such as high temperature and dust, providing a solid guarantee for the reliable operation of the industrial Internet of Things.
3. Educational and scientific research applications: In schools, research institutions, and other places, Raspberry Pi 5 is often used for teaching experiments, scientific research project development, etc. The convenient installation and POE power supply function of POE HAT make it easier for students and researchers to set up experimental environments. For example, in online experimental teaching, students can quickly connect Raspberry Pi 5 to the campus network through POE HAT for network programming, server setup, and other experiments without worrying about power issues. The cooling fan helps to ensure that the performance of Raspberry Pi 5 is not affected when running complex experimental programs for a long time, improving experimental efficiency and success rate.
Package Content:
1x Aluminum Case for Raspberry Pi 5.
1x Cooling Fan.
1x Screwdriver.
4x standoff.
10x Black M2.5 Screw.
